- MIG/MAG standard welding machines, step switch controlled, gas-cooled
- Multivolt – switchable from 230 V to 400 V
- 2-roll drive, designed for 0.8 mm + 1.0 mm steel wires
- 5 m mains supply lead with CEE 16 A plug and 16 A shock-proof adapter
- Twin-knob operation: configuration of operating point using wire feed speed and welding voltage
- Adjustable spot, interval and pause times
| Operation mode |
Manual adjustment of the operating point |
| Welding process |
MIG/MAG |
| Operating modes |
Non-latched |
|
Latched |
|
Resistance spot welding |
|
Interval |
Category: STEP SWITCH CONTROLLED WELDING MACHINES
| Version |
Mira 221 MV |
| Setting range for welding current |
30 A - 220 A |
| Duty cycle 40 °C |
220 A / 15 % |
|
85 A / 100 % |
| Open circuit voltage |
14.3 V |
| Mains voltage |
1 x 230 V |
| Tolerances |
-40 % up to +15 % |
| Mains frequency |
50 Hz / 60 Hz |
| Recommended generator power |
10.9 kVA |
| Wire feed speed |
1.5 m/min - 20 m/min |
|
59.05 ipm - 787.4 ipm |
| Factory-installed roll equipment |
0.8 + 1.0 mm / Steel |
| Spool diameter |
D200/D300 |
| Torch connection |
Euro torch connector |
| Protection classification |
IP23 |
| Test mark |
 |
| EMC class |
A |
| Dimensions (L x B x H) |
888 mm x 379 mm x 604 mm |
|
35 inch x 14.9 inch x 23.8 inch |
| Weight |
56 kg |
|
123.5 lbs |
| Standards |
IEC 60974-1, -5 and -10 CL.A |
